How to install a car spoiler kit

Yes ! You can install a car spoiler kit yourself. Let's guide you through the simple step-by-step do-it-yourself process to achieve that performance lookyou have been dreaming of.

First, make sure rubber gaskets are installed on the bottom each pedestal. If not, install them.

Next, open the trunk lid and cover the rear windshield and the trunk area with a sheet to protect it from metal pieces and shavings falling during the installationof the the car spoiler kit.

Place the drill guides into the mounting holes of the spoiler and lightly tape themdown with small pieces of masking tape to hold them in place. We like to use a non-residuetape such as the Tesa brand.

The next step in the installation of the car spoiler kit consists in placing the spoileron the deck lid. To do so, partially close the deck lid and align the spoilerto proper position using the measuring tape. Once it is in position secure the drill guideswith masking tape (this time use a wider tape to help ensure the guides will not move whenthe spoiler is lifted).

Lift the spoiler straight up to avoid the guides from moving. Insert a 1/16" drill bit intothe guides to mark the paint surface of the deck lid. Remove the guides and then use a 1/8"drill bit to drill holes where you marked the surface making sure to drill through the secondlayer, if there is one.

The installation of the car spoiler kit is almost done ! Open the holes on the surface of the deck lid to accomodate the screws provided. Place the spoiler on the trunk lid and carefullyinstall the screws with a hand tool.

Remove the sheet, close the trunk and carefully clean the area of any metal residues.

Here you go !! What a great look !! And you have spared the installation cost !!

Installing a car spoiler kit is real easy. Need to shop for one ? Click here.